Precautions in powder filling and sealing machine charging steps

Powder filling and sealing machine is a kind of packaging machine, which can pack powdery materials with relatively low viscosity, such as oatmeal, milk powder, coffee, etc., and can get ideal packaging effect. After purchasing powder filling and sealing machine, manufacturers usually have some confusion in use, and they are not very clear about the specific operation process of the product and the matters needing attention.

In fact, the use of powder filling and sealing machine for packaging requires multiple steps to complete this series of operations, such as charging, packaging, finishing and cleaning, etc.

Today, let's take a look at the precautions in the charging steps of powder filling and sealing machine. The details are as follows:

To load the material to be packaged in the hopper of the powder filling and sealing machine. This process generally involves the following aspects:

1. The powder filling and sealing machine should start stirring while charging, which can make the material more evenly distributed in the hopper and avoid the phenomenon of uneven packaging;

2. Set the appropriate number of feeding bags according to the characteristics of packaging materials and packaging specifications, mainly to ensure stable feeding and reduce weight changes caused by the impact of feeding, thus affecting the measurement accuracy;

3. If you hear an abnormal sound in the silo during the charging process, you should stop the machine immediately, check the condition of the silo, and ensure that there are no foreign objects before continuing to work;

4. When packaging small-sized materials, do not place the weighing platform in a place with too much air circulation, because the wind can affect the minimum index display of the sensor, and the balance is sensitive to the force of the wind, which can easily cause the measurement display to be unstable. Phenomenon.

In a word, charging is an important part of powder filling and sealing machine. We should avoid all unfavorable factors as much as possible in this process to ensure normal charging.